Orthocryl Lamination Resin 80:20 PRO

80:20 PRO: optimum penetration of the reinforcement

Orthocryl Lamination Resin 80:20 PRO is a lamination resin for the fabrication of components with a low proportion of resin. It has a lower viscosity than Orthocryl Lamination Resin 80:20 (617H19) but the same mechanical characteristics. Thanks to the lower viscosity the reinforcement material can be penetrated more effectively, allowing air to escape faster from the reinforcement. Hardener and colour pastes are easier to mix with Orthocryl Lamination Resin 80:20 PRO.

The reinforcement materials are soaked more effectively when processing with Orthocryl Lamination Resin 80:20 PRO (617H119) instead of Orthocryl Lamination Resin 80:20 (617H19). The air that is pushed out and subsequently rises can escape from the resin during lamination and is not locked into the resin. This increases the quality and stability of the end result.

All benefits at a glance

Rapid evacuation of air from the reinforcement
Air that is evacuated and subsequently rises can be released from the resin during lamination
Air is not trapped in the resin. This improves the stability of the end result
Hardener/colour pastes are easy to mix

Specifications

Article number	617H119=0.900	617H119=4.600	617H119=25
Basis	Acryl
Net contents	0.9 kg	4.6 kg	25 kg
Product Type	Lamination Resin
Safety instructions	For further information on the safety instructions, please see the corresponding Ottobock safety data sheet.

Application example

Prosthetic socket application example

This resin was developed especially for the lamination technique and can be used in combination with our proven reinforcement materials.

Winning Combinations

Carbon Fibre Cloth 616G120

Length: 2m, 5m, 10m
Width: 1m
Colour: Red(2), Blue (5), Green (3)
Order example: Reference number = length - colourcode (e.g.: 616G120=2-2)

red

Colour: Red(2)

blue

Colour: Blue (5)

green

Colour: Green(3)

Fibreglass Cloth 616G180

Length: 2m, 5m, 10m
Width: 1m
Colour: Silver (16), Light silver (16.4)
Order example: Reference number = length - colourcode (e.g.: 616G180=2-16)