Belt sander

Precise, safe and effective - for the perfect grinding

Many work tasks in the orthopaedic workshop are performed using the belt sander. That’s why we have made targeted enhancements to its proven, vibration-free Ottobock technology. The result is impressive: A machine that matches your needs perfectly, offering high performance, distinctly quiet running characteristics, maximum precision and comfortable operation.

“On the spot” lighting

Direct light on the sanding belt gives you an optimal view of the workpiece and your sanding work.

Easy to change sanding belts

The sanding belts can be changed without any special tools. The new belt is adjusted once using the rotary knob and consistently runs true to centre after this.

Extraction on the sanding belt and supporting table

The extraction system on the sanding belt and on the supporting table captures fine dust where it arises in a highly efficient manner. As a result, you can keep your workplace clean and protect your health.

Pneumatic belt tension

The sanding belt is tensioned with a push of a button. The compressed air cylinder guarantees the correct belt tension at all times – even if the belt stretches. The machine must have an external compressed air supply of at least 6 bar for this purpose.

Floor suction

Coarse dust which falls to the floor can simply be swept towards the floor extraction system. From here, the system removes it completely and your workshop remains clean.

All benefits at a glance

Large sanding surface: a sanding belt width of 320 mm and a sanding height of 450 mm enable easy sanding of plates with a height of up to 400 mm.
Continuously variable control of the sanding belt speed from 6–16 m/s
Solid steel construction for very quiet running characteristics
Sanding belt lighting
Floor extraction
Edge extraction for support table and sanding belt extraction
Shut-off valve integrated: The belt sander can be connected directly to a dust extractor. When combined with an Ottobock dust extractor, the integrated shut-off valve is opened, the dust extractor is powered up and the full extraction capacity is available when the belt sander is started.
Sanding belts can be easily replaced without requiring any further tools
Pneumatic belttension
Can be bolted to the floor for secure positioning and very quiet running characteristics
Spacer for adjusting the working height (10 cm)

Technical data

Article number	701P250=1
Version	Effective sanding height of 450 mm, pneumatic belt tension, light strip on sanding belt, integrated floor extraction, extraction on sanding belt, continuous speed control, incl. 649G60=2175X320 sanding belt
Electrical connection in V/Hz/kW	1x 230/ 50-60 / 2,2
Dimensions WxDxH	712 x 875 x 1.787 mm
Belt width	320 mm
Belt speed	6 - 16 m/s
Exhaust nozzle Ø	125 mm
Weight	290 kg